Outer Limits 4x4 Board

hey guys,
i am about to run cross over sterring and i am a bit confused, i was thinking i needed an 80 series sterring arm (drag link i think) to go from the pitman arm to the cross over arm but then i realized its was an 80 pitman arm.
so would it be a another hilux tie rod i need ??? plz hlp

anyone know what linkage goes from the cross over arm to the pitman arm

Draglink mate.

What vehicle?

Put ends in the crossover arms then measure what size rods you need.

Head to a wreckers and match them up

its an ln106
i am thinkin a hilux tie rod but it mite be to long

lukeys 4x4 customs makes tie rods and draglinks to order. just need a length between the hole on the knuckle end to the hole on the pitman arm. 0409 991742 cheers lukey

If your needing/wanting x over spend the money and get solid rods, and 80 series ends, or youll end up like me driving it home with cockeyed steering, or worseee.

You need

80series pitman arm
Double arm 2 std arms welded together one upside down
Custom arm from pitman to pass double arm
You can use your existing tierod but you'll bend it if you hit it or sit the trucks weight on it, id suggest getting a solid one, and use 80series rod ends on all 4 links.

yer i got a superiour welded double end thing,
so i am gunna need a custom length rod to go from it to the 80 serious pitman arm

http://www.superiorengineering.com.au/p ... ts_id=1787

www.budscustoms.com.au??? also sells them, at a cheaper price, just give him a call or email he'll make one up.

will buds know how long to make it

Yes, just tell him what your doing and what parts your using.

buds it is then