Page 1 of 1
Marks adaptor kit 304 to GQ what accelerator cable?
Posted: Wed Mar 17, 2010 7:01 pm
by A.R.T Racing
As subject says, what accelerator cable should be used in this conversion? The one i have seems just a tiny bit too short, does anyone know what one fits best. When i got the truck the accelerator cable has been bent to one side, when straightened the engine revs too high...
Posted: Wed Mar 17, 2010 8:10 pm
by patrol man
I just make my own, using motorbike clutch cable.
normally you can reuse your old outer ends and fit a new inner and outer cable, there are generic replacement cable ends available
cheers
accelerator
Posted: Thu Mar 18, 2010 7:23 pm
by A.R.T Racing
Yeah i've made my own before with success back in the 80's, but seen as this is such a common conversion i thought someone would know which one fits.
I'll give Marks a call tomorrow, maybe they can help.
Posted: Thu Mar 18, 2010 7:51 pm
by simcoe
by memory the 304 commy one fits with a slight bending of the "go" pedal and moving the throttle mounting plate slightly(drill some new holes for it)
worked with my gu anyway
