Outer Limits 4x4 Board

I have a 200amp redarc and im getting abit lost in the wiring for the winch of both batterys diagram they have on their website

http://redarc.com.au/knowledge-base/wir ... -batteries

now the thing where im getting lost is with the positive input from winch switch part

now in this crap diagran i quickly made, does this look right as from the winch I have 3 wires (Warn Highmount) , in, out and the other would be the positive??

so with what i have does this look correct in that I join both wires from switch and winch together to the 86 terminal???

ok the way i read it is that you need to pick up a postive power say from the solenoid that only gets power once you hit the winch switch/hand controller. then that power that goes 2 86 then switches the coil and then supplies power to pin 87 and then powers up the blue override wire on your red arc unit thenlinking the 2 batteries together

ok saying that makes wiring it up a bit clearer in my head..

i will test some wires tommorow and get it all sorted out