Outer Limits 4x4 Board

Hi.
Just wanting to get peoples veiws or experiences with what camshaft spec to use in a ls1 that will be used for 4wd purposes.To get the torque and power lower in the rev range to the current spec it is.

Has any one used a 218/222 @50 and has 585 lift and 114 lc camshaft. It seems a likey one so far from my research.

Any help would be appreciated.

Thank you.

I'd think that stock would be the way to go. I thought 'big' cams created more power HIGHER in the rev range, at the expense of power/torque in the lower rev range, which = bad for 4b's.

Therefore, stock.

macey wrote:Hi.
Just wanting to get peoples veiws or experiences with what camshaft spec to use in a ls1 that will be used for 4wd purposes.To get the torque and power lower in the rev range to the current spec it is.

Has any one used a 218/222 @50 and has 585 lift and 114 lc camshaft. It seems a likey one so far from my research.

Any help would be appreciated.

Thank you.

mate take your inquiry to aussie v8 your question will be answered!

Ok thanks.I will get online and and see what they suggest.