Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1fz ze 4.5 80 series oil guage pressure

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 12
Joined: Sun Sep 06, 2009 9:53 pm
Location: Noosa

1fz ze 4.5 80 series oil guage pressure

Post by DOZER »

I have just installed one of those vacume oil pressure guages in my 80 and was wondering what reading I should be getting of the guage on both idle and foot down.

Cheers
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

are u talkin about a vacuum gauge?

if so it should goto 0 when u flatten it, not sure wat it should run on when idling.

but when driving, the higher the number the less load the motor is under, so its using less fuel....
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

If it's an oil preasure guage then at operating temp at idle should be 29 kPa and at 300 rpm should be between 245 - 490 kPa.
www.bolsys.com.au
Top
Posts: 12
Joined: Sun Sep 06, 2009 9:53 pm
Location: Noosa

Post by DOZER »

Yeah it's a pressure guage. It reads in psi, it has about 20 psi idle and about 40 psi under revs. Every on tells me something different. Some say what it reads Is great but some say bad lol. The usual story.

Cheers for the reply guys
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest