Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what head gasket for tb42 turbo

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

what head gasket for tb42 turbo

Post by rob_rover »

whats the best head gasket to use for tb42 turbo engine?

and where to get one from in melbourne?
Top
Posts: 252
Joined: Fri Sep 02, 2005 3:45 pm
Location: outside your window

Post by hiy6o »

I'm using Genuine Nissan with new head bolts , running 13 psi no probs
Nup not telling
you'll have to find out yourself
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

Depends on the level of boost. Biggest problem is soft heads, the alloy hardness deteriorates due to the heating and cooling over time. A rockwell hardness test on numerous locations of the surface needs to pass at least 85 Rockwell(bare minimum for NA), and ideally over 100 Rockwell is better(new is around 130.
Stock headgaskets that have a graphite coating are excellent as are multi layer steel shim as used on the 4.5.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 153 guests