Outer Limits 4x4 Board

Got the shakes in my 105 series at the moment. Just had a rotation and wheel balance to try to fix the problem, but no good, still there. Feel it real bad around the 100 mark on the highway. Checked uni's and tailshafts, But they look good. Found no play in the panhard rod.

I think its time to check the swivel hubs - wheel bearings or kinpin bearings.

What are other peoples thought??

Aslo have the disconnect in the front drive as well.

also check tie rod ends, radius arm bushes and double check panhard rod bushes

I had the shakes really bad on the 100 a few days ago, wasn't until I had a mate jumping on the bullbar while I was underneath that I saw a bit of movement in the panhard.

Had the same prob with my 105......checked the brgs, wheel alignment etc. Tracked it down to the tyres, they'd gone hard and out of round etc....

I Have the same with my 105??.but 2 weeks ago i got a recall notice to replace the retainer bolts in the front hubs,so now getting full swivel hub kit and new inner and outer bearings to try and fix , I also have got new tyres and a new steering dampner




cheers jimmy

Yeh the tyre guy said they where slightly old of round, but had them rotated front to back still with the same feel. Got it booked in to get the front end looked at. Haven't got time at the moment to do it myself.

ive had this problem for so long, done everything , has to be my tyres or something, but i changed the steering damper location and is all good now