Page 1 of 1
Need help chasing a product/part.
Posted: Wed Mar 31, 2010 9:09 pm
by ANIMAL
Hi all, done a heap of searching but with no luck.Im chasing an aerial mount that you can pull out a pin and collapse it down,leaving it on the vehicle.I've seen somewhere but can't remember where(mag or dvd??).I was thinking of mounting it on my touring rack on passenger side to mount my sand flag when we do the simmo in june,folding down towards the rear when not in use.If anyone can put me in touch with this product or have links or pics i would greatly appriciate it.Thanks in advance
Posted: Wed Mar 31, 2010 10:13 pm
by RAY185
Posted: Wed Mar 31, 2010 11:08 pm
by Harb
Try Andrews Comunications and ask for a fold over antenna mount.....
like this.........
or Ebay
http://cgi.ebay.com.au/Workman-EZ1-Fold ... 554wt_1167
Posted: Thu Apr 01, 2010 10:04 am
by ANIMAL
Thanks for the response, will follow all leads up.Will post up a pic when its all set-up
Posted: Thu Apr 01, 2010 10:12 am
by pongo
think it was GME that made a stainless whip arial that had it already built in, you could simply unscrew the small flange and it would fold down. they are a nice ariel and pretty cheap.
I used a bolt on mount on the bullbar for my big whips, left it loose enough to simply pull down so i could get it in and out of maccas drive throughs,etc.
Best bit was if you hit something likely to bust the whip, it would just move the mount rather than snap the arial
Posted: Thu Apr 01, 2010 11:59 am
by Red Dog 4x4
Posted: Fri Apr 02, 2010 8:29 am
by ANIMAL
no answer at andrews comm,left a message.Rang pefab talked to old mate got some good info,just need to look at a few more before i make a decision.Anyone got any pics of what their running? cheers.