Hi everyone!
Can anyone point me in the right direction to anyone who can make control arm bush type engine mounts for a LS1 into GQ? I want them to be made without the car going to a shop.
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine mounts
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Engine mounts
97 4x4 hilux
They are very easy to make.....
Ive made them a few times on my old rigs.
Just a round tube the size of the bush, weld some 32NB to it and what ever legnth is required and weld it and brace it to the existing engine chassis plate. pop your push in and your sweet.
The engine side i just had a plate bolted to the motor with a piece of 'C' section welded to it with a hole through it to pop your bolt through....
I would imagine most blokes that can do the job for you would want to have the truck brought to them as they will need their welders and other equipment to make them....
Screwy
Ive made them a few times on my old rigs.
Just a round tube the size of the bush, weld some 32NB to it and what ever legnth is required and weld it and brace it to the existing engine chassis plate. pop your push in and your sweet.
The engine side i just had a plate bolted to the motor with a piece of 'C' section welded to it with a hole through it to pop your bolt through....
I would imagine most blokes that can do the job for you would want to have the truck brought to them as they will need their welders and other equipment to make them....
Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 5 guests