Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer ring and transfer case handbrake?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

transfer ring and transfer case handbrake?

Post by hiluxmad »

running a transfer case handbrake on my lux and trying to sort out running a transfer ring mount to give better clearance.
any body run both?
is there any reason why the disc on the handbrake cant be run between the pinion flange and the hand brake?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

I' running both. But I just grafted the hand brake onto the transfer ring.

Or lay the hand brake bracket on top of a new transfer ring and mark out the bottom section to cut off, then weld the left over top bit to the hand brake section. Bolt up to transfer before welding to hold it flat and true. Let it cool and ya under way.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 17
Joined: Sun Jun 28, 2009 1:43 pm
Location: Brisbane

Post by cyberblitz »

hello
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests