Outer Limits 4x4 Board

Hey all, sofar ive found out its a 41mm nut.. but i need the thread size for the nut on the harmonic balancer on a TD42 motor as mine's gone M.I.A

Trying to avoid buying it thru nissan and wreckers only seem to have a bolt on type instead of the big nut that mines got

So im hoping someone somewhere has one pulled apart that can tell me the thread size on the end of the crank so i can go to boltmaster or somewhere similar and buy a nut

Thanks in advance

Ryan

Why not give patrolapart a ring. They can post and have heaps of stuff for patrols

http://www.patrolapart.com.au/

Just a question, you do have the tapered ring which sits behind the nut too dont you? Just thinking if your nut went missing maybe the ring did too!

Oh another thing - the TD42T engine has a different size nut too.

Clanky wrote:Oh another thing - the TD42T engine has a different size nut too.

in case anyones cares its 55mm
i found that out after buying a 41mm 3/4 socket

Factory turbo one is 55mm, earlier is 41mm.

Clanky wrote:Why not give patrolapart a ring. They can post and have heaps of stuff for patrols

http://www.patrolapart.com.au/

Just a question, you do have the tapered ring which sits behind the nut too dont you? Just thinking if your nut went missing maybe the ring did too!

Oh another thing - the TD42T engine has a different size nut too.

hehe yeah i got the tapered ring.. lucky tho as it was loose but i got it before it all made a big mess of everything lol.. will give patrolapart a buzz tomorrow and see how i go thanks for ya help

could have got it thru nissan by now but i keep forgetting to order it lol

Send Garry an email at Nizzbits nizzbits@hotmail.com
He is really helpful and sells Nissan genuine parts - I get all my parts from him and the prices an post are pretty good compared to the dealers