Page 1 of 1
body lifts
Posted: Sun Apr 04, 2010 3:06 pm
by jezzaGQ
hi im asking for a mate whos wanting to do a body lift... will 60series or hilux 2inch blocks fit into an 80 series wagon? cheers
Posted: Mon Apr 05, 2010 1:40 pm
by hurricane
all the body blocks ive seen look the same, just a alloy block with a hole down the centre.
so as far as i know it would only the amount of the blocks, or the length of the bolts that might course u issues?
dan.
Posted: Mon Apr 05, 2010 2:47 pm
by Willy Hilux
Could use a boat trailer roller and cut it in half.
Posted: Mon Apr 05, 2010 3:11 pm
by coopster
i got new alloy blocks if interest
Posted: Sat Apr 10, 2010 4:19 am
by maddog_75
coopster wrote:i got new alloy blocks if interest
got enough 2 inch blocks to do a 75 cruiser?
Posted: Sat Apr 10, 2010 10:33 am
by BadMav
Willy Hilux wrote:Could use a boat trailer roller and cut it in half.
Now that's thinkin outside the box!!!
body lift
Posted: Sat Apr 10, 2010 10:41 am
by brendan rooke
I put my old body blocks out of my 60 in my mates 80, i made them from neoprene rod 65mm diameter and cut them into 3" lengths.
I removed the factory rubbers so this gave it 2 inch lift.
Posted: Sat Apr 10, 2010 7:30 pm
by jezzaGQ
sweet as thanks for your input ill let him know so he get his ass in to gear lol
Posted: Sat Apr 10, 2010 8:02 pm
by S.CoXy
Could use a boat trailer roller and cut it in half. Cool
We have always used 50 or 70 mm nylon stick from a bearing shop and cut it to lenth the drilled holes and glued washes on the end. Cost $50 plus bolts never had the need for a crush tube and some of these where done 5yr ago...