M24 sandwich plate, oil filter plate
Posted: Mon Apr 05, 2010 9:18 am
Hi i have a 5LE motor with a M24 thread on the oil filter (same as the 1kzte motor), i want to run a oil cooler but the standard sandwich plates only go up to 22mm...
Any one know if there is one around in this size, or if there is another option to run a oil cooler.
Also i am running a turbo, so the port on the block i was going to use is already taken up.
Cheers
Brad
Any one know if there is one around in this size, or if there is another option to run a oil cooler.
Also i am running a turbo, so the port on the block i was going to use is already taken up.
Cheers
Brad