Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to buy cheap radiator 95 v6 runner auto ? alloy?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Where to buy cheap radiator 95 v6 runner auto ? alloy?

Post by spamwell »

Looking to find cheap radiator for my 1995 v6 auto 4runner, the prices i have been quoted are higher than what i have seen custom alloy radiators and such quoted for commodores etc.

Does anyone know of a decent cheap supplier or of a place which will make a custom alloy one for a decent price.

Thanks Sam
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Why not get the original one recoed. Mine only cost $400 and that included beffing it up to 4 cores?

Cheers
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

it's been done before, the whole thing is stuffed, the top tank is the main problem at the moment, 360 for a new assembly..
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

hey mate. go to caloundra radiators and cv's. i have a 91 4runner and its were i got mine a few months back. its massive and cools the engine so well. can give it a flogging in the mud in the middle of summer and the temp doesnt change. it cost me $526 fitted with a system flush and some new fluid. it worth spending the money. its on alan street in the moffat beach industrial area. u live at maroochy so u shouldnt have any trouble finding it. hope this helps.

cheers tim.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

spamwell wrote:it's been done before, the whole thing is stuffed, the top tank is the main problem at the moment, 360 for a new assembly..
Is that for a new rad or parts to repair yours or for yours repaired?


Cheers
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

new radiator assembly, i would put it in myself
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

That's a fairly good price really, anything cheaper would probably be just that Cheap.

Good luck with it.

Cheers
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

Struth wrote:That's a fairly good price really, anything cheaper would probably be just that Cheap.

Good luck with it.

Cheers
Agree, cost me a little over 400 for a new 75 series rad.
http://www.populationparty.org.au/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 76 guests