Outer Limits 4x4 Board

Hey,
I have a 80 series and one of the connections that the hose joins to the diff breather is broken.

how is the fitting on the diff housing? screw thread?
Going by this they are a screw style
http://www.outerlimits4x4.com/ftopic120 ... t=breather

Any idea on thread / length? i may as well lengthen them while i am there

It is a screw in fitting.Size not sure,probably about 8mm x 1.25 but unsure.

it is 1/8 gas thread

go to pirtec or a hose fitting place they will sell you one