Outer Limits 4x4 Board

If anyone knows anyone who has a Feroza Bullbar or Towbar for sale, can you please PM me.
Thanks.
Richard.

I have an ARB OE Feroza Widetrack Winch Bar...........................one of a kind !!


BUT it's not for sale

Have you thought about getting a custom one made for your Feroza ???

i've got a custom one made for mine as well.. sorry.... NOT for sale... but you CAN look at it if you want....

Yeah thanks heaps guys, I'll have a look at yours and that will satisfy me !
R.

lol sorry mate.. ur much better off gettin one made is my personal opinion. unless you have the $$ to buy one from arb. if theres any decent fellas you know who's a welder, talk to him. i dont think i could be happier with my a bar which i had custom made for me. and i also left room for modifcations as well, which is real sweet... see the pic below.

Mine came with the bar, so I haven't been in your situation.. sorry
Good luck though.. Just wish mine could fit a small winch though... (not that I can afford a winch)

But if you decide to get one made, here's a pic of mine, incase you want some ideas.. (id suggest it be about 5-10mm higher in the tubing, as it does block the tops of the headlights somewhat..

yeah that does look pretty good actually !
I don't really want to get one custom made because I was quoted $1150.
Way too much for me, I was trying to get one of those ones that came as an accessory on the Feroza's when new - I was hoping I could find one at a wrecker but phones around and Can't.

Never mind, I'll keep looking and thanks for the tips guys.
Rich.

TUBE BAR!!!

PM Surfection on this board and he may be able to help out...

I havent seen a Roza with a tube bar yet....

sure about that ?

Is it just me or does that look a bit .... ummmm.... average?

Some people on here have got really nice tube bars- there was thread a while back devoted to it with pics in the General Tech.

The last I heard there is ONE original ARB bar left - in Adelaide and the asking price is $1100! The one below is a mockup of one I have designed to build for myself. It isn't rocket science and uses only basic componentry such as some bent tube and folded front replacement bumper. I have had an alloy bar on other vehicles and was not prepared to keep wasting time polishing it so this one will be galvanised steel, powder coated grey. This one should rock in at under $300 for parts and powder coat with me providing all the free labour.

David, please don't tell me that, that is the finished product on the car in the picture. Because it looks like you've been playing in Microsoft Paint!

Accessories are alot cheaper when you paint them on!

Dave

Breathe easy, like I said it is only a mock up and the resolution dropped off when I had to rescale the image to fit on the forum. First step is to decide what you want, then make a mockup from cardboard. The mock up then provides the template for cutting and folding the steel sheet. Step 3 is to weld up the completed bar after fabrication and fit it to the car. I have redesigned the thing slightly to accomodate some serious driving lights - as below.

jabboo wrote:sure about that ?

Thats not a tube bar...

This is...


http://www.outerlimits4x4.com/PHP_Modul ... p?id=15138

Croz wrote:

jabboo wrote:sure about that ?

Thats not a tube bar...

This is...


http://www.outerlimits4x4.com/PHP_Modul ... p?id=15138

What is it then?!?

It's made from stainless tubing with the normal indicators mounted in between the tubing.

murcod wrote:

Croz wrote:

jabboo wrote:sure about that ?

Thats not a tube bar...

This is...


http://www.outerlimits4x4.com/PHP_Modul ... p?id=15138

What is it then?!?

It's made from stainless tubing with the normal indicators mounted in between the tubing.

It's just not as "in your face" as the other one.

dude i know a welder that will do one for around 600 for ya. hes goiing my rear bar and though its not done yet its going to be very strong and look sweet.

like every one said custom bars are the way to go. plus he lives in newcastle

talk to surfection, he made mine for 350 and its the shit

why dont you do what i did and weld a hilux steel bar to the chasis rails. Cost me only $100 and looked ok.
If excessories cost ya a heap ya gonna be pissed when ya damage them.

Ok, Lots of feedback and opinions, thanks Guys.
What about the Bars that were an option on the Feroza's when new, what are they like?
Please remember I am not going to push over trees with it, I'm a novice 4WDer.....Don't like to wreck my truck.

Hey Rich, have you seen this?

http://www.bmackay.com.au/topdog/daihatsuferozabb.html

Looks suspiciously like a TJM sticker on it??

mines a real bullbar...the BIG TUBE BAR....I'll sell it to ya for 10g plus you get the car for free...?

Thanks for that Website dave, I did have a look at it and those Bullbars look excellent don't they. You offer was great to em, however I have now decided I am going to pass on the bullbar idea....long story.....
I first bought the Feroza ( only 2 months ago now) to try out four wheel driving and going bush to see if I like it, well I have been out nearly every weekend and have decided that I like it and will take it up as a hobby. Once I get a little more experience over the next few months, I intend to sell the Feroza and get another bigger 4Wd, I am probably going to get a Late model Turbo Diesel like a 2002 Prado.
So not much point in spending any more on the Feroza as I see it.
Otherwise I'd but your bullbar em....of course!

if ya gonna get right into the 4x4 thing dont spent too much on a 4x4 coz ya will just damage it and break things. Buy something thats easy and cheap to fix. Parts may be expensive for a prado. check prices for the usual things at a local wreckers first. id keep the feroza and modify it. or buy a sierra.

Yeah but I only want 1 car, with 1 lot of rego and insurance each year.
And I want it to be good enough to go on long trips interstate.
Stuck between a rock and a hard place !

easy solution......buy a nice 80 series turbo desiel with all the extra's and your set!