Outer Limits 4x4 Board

Posted: **Wed Apr 07, 2010 9:32 pm**

Im after 2 rings made up

ID- 103mm
OD 111mm
thickness about 2-3mm.

Sizes are measure but still what i call approx, due to my dodgy veniers.

I'd be happy to drop off the 2 parts so the spacers can be made exact.

Mild steel preferred, but i reckon any metal should do the trick

Its actually for mounting GQ rear rotors onto MQ axles.

Who knows, You could make a small buck making a few at once.

Thanks

Posted: **Wed Apr 07, 2010 10:51 pm**

Get them laser cut.

Posted: **Thu Apr 08, 2010 7:42 am**

rustys wrote:Get them laser cut.

can you suggest a reasonable laser cutters in western sydney? i need to get some 12mm plate cut for some swaybar arms

Posted: **Thu Apr 08, 2010 8:18 am**

rockcrawler31 wrote:
rustys wrote:Get them laser cut.
can you suggest a reasonable laser cutters in western sydney? i need to get some 12mm plate cut for some swaybar arms

http://www.lasermade.com.au/

http://maps.google.com.au/maps?hl=en&cl ... CCkQtQMwAA

Bazzle

Posted: **Thu Apr 08, 2010 9:10 am**

thanks mate

Posted: **Thu Apr 08, 2010 6:42 pm**

Know any ARA boys... They have bit work shop near SYD

Outer Limits 4x4 Board

i need a small and easy Metal lathe work done in sydney.

i need a small and easy Metal lathe work done in sydney.