Page 1 of 1
33 x 12.5 x 15 under 60 series with standard suspension
Posted: Sat Apr 10, 2010 11:38 pm
by lc61vx
anyone knows if 33 x 12.5 x 15 will fit under 60 series with standard suspension? or do i need a 2" lift?
Posted: Sun Apr 11, 2010 3:47 am
by hillbilliywheelchair
they'll fit as long as your suspension hasn't sagged to much
Posted: Sun Apr 11, 2010 8:03 am
by AUSCRUZER
My mate has just put 33s on his 60 with worn out springs and all ok.He is running the standard crome rims BTW.
Posted: Sun Apr 11, 2010 10:06 am
by Shadow
my 60 has stock standard springs with 33x 12.5's
they rub when it flexes up though. on the rear
Posted: Tue Apr 13, 2010 11:06 pm
by Wambat
ran 33s on my old 60 without a problem,
Posted: Wed Apr 14, 2010 12:04 am
by oldmate
ran them on my old 60 too. had 2 inch lift and no sway bars. I remember the front rubbing especially when turning, can't remember about the rears. Lift won't make any difference. extend the bumpstops and add wheel spacers, or cut/bash in the flairs an inner archers, or just live with it.
they were bridgestone 33s and are smaller than some others too.