Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

noisy lifters after replacement

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 1
Joined: Tue Nov 24, 2009 8:15 pm
Location: central coast

noisy lifters after replacement

Post by monsterzuk »

a mate of mine has a 95 model 3.5 ltr v6 pajero and only had lifters replaced on saterday 10/4/00 the mechanic said it may take 2/3 days for lifter noise to go. the noise is still there after motor has warmed up. but no noise on cold start. any advice as my mate is about to tourch it
thanks.
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

its a mitsi thing, they will always be noisy, i sent my rebuilt engine back under warrenty to get them redone, they still tick, going to try the injectors next
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
User avatar
pjb
Posts: 103
Joined: Thu Sep 24, 2009 8:59 am
Location: North Shore City, New Zealand

Post by pjb »

I've had persistent lifter noises ever since I blew a head gasket and the oil turned to caramel. I've changed the oil three times since then and each time it's progressively better. This last oil change I think I've cracked it:

Warmed up the engine to operating temp.
Added in some of that oil flush additive and idled for 15 mins.
Dropped the oil while it was still as hot as possible.
Changed the filter.
Put thicker oil in this time: 20W-50.
Added new type of additive: MBL8: http://www.fueloiltreatments.com.au/Tec ... itive.html
Drove around for 30 mins.

No more lifter noises. I guess you could say it's 'in remission', since I just don't think it's possible to cure this problem.
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Posts: 40
Joined: Thu Jan 28, 2010 9:10 pm
Location: Sydney

Post by samdumbert »

I would be taking the sump off and checking that the pickup isnt blocked.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

samdumbert wrote:I would be taking the sump off and checking that the pickup isnt blocked.
Definately do that ..

http://www.outerlimits4x4.com/ftopic204819.php
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests