Page 1 of 1
GU short side cv
Posted: Thu Apr 15, 2010 8:43 pm
by J.Dixon80
wats a good price for a 2nd hand cv? and wats a estimated time in pulling the old one out and gettin the new one in?
cheers
Posted: Thu Apr 15, 2010 8:58 pm
by SuperiorEngineering
just ring the wreckers and compare prices for a second hand one or try steve at driveline services @geebung they sell new NTN cv's
If you have a bit of mechanical knowledge less than 1 hour per side not rushing it, guys who compete do it in about 10-15min on average.
Posted: Thu Apr 15, 2010 9:13 pm
by J.Dixon80
oh yeah cheers , 15 mins is pretty insane! done a 80 before with a mate, is there much difference between the 2?
Posted: Fri Apr 16, 2010 9:12 am
by SuperiorEngineering
If you have done a toyota you can do a nissan, just as easy just remember the wheel bearings on a nissan need to be a bit tighter than toyotas.
Posted: Fri Apr 16, 2010 1:50 pm
by Unidriveshafts
As Mick said, with a bit of mechanical know how it should only take you about an hour from start to finish. We do new NTN CV & Axles for $270 + GST or just the joint alone is $160+ GST. Try Festa at All 4x4 parts-5426 8365 for a price on a 2nd handy. Cheers Steve.