Outer Limits 4x4 Board

hi guys i have recently bought a 2nd hand snorkel, and now i need a template so i can fit it to my 80 series cruiser. i have searched the net and been out to a few 4x4 shops, but they were less than helpful. if anyone knows where i can find one i would really appreciate your help.

cheers webster.

template still needed for my 80 series, any help would be greatly appreciated.

I'm getting one installed today I'll see if they give me the template and I'll get back to you.

if you get stuck you can just get one off ARB, they were like $25 when I bought one last they said to cover printing etc ...

Mate, just do what i did
cover the whole guard in tape
grab a thick black maker
colour in where the bolts & screws will go
Place the snorkle on the guard and the screw & bolt holes will show on the tape
Do a few line ups before you drill or cut anything

I did this for my 80 and my 75 and did not have a problem at all. The marks showed up perfectly on the tape and away i went.

All you haver to do is take your time and don't rush and you should not have an issue.

Sorry mate I asked the place I got it done at and they threw the template out (or thats what they told me anyway!)

Did you find one? If not PM us your address and we'll send you one...

Cheers

webster wrote:hi guys i have recently bought a 2nd hand snorkel, and now i need a template so i can fit it to my 80 series cruiser. i have searched the net and been out to a few 4x4 shops, but they were less than helpful. if anyone knows where i can find one i would really appreciate your help.

cheers webster.

thanks everyone for the response, and also unsub for chasing that for me. hopefully onto one now thanks to DNA OFFROAD.

No worries Webster - in todays mail...

Happy days

Cheers