Boss Air Compressor and draws Install i/c ARB lockers
Posted: Tue Apr 20, 2010 9:02 am
This is an install of my Boss Air Compressor to run ARB air lockers.. I chose the Boss Air compressor because of its reliability (i didn't trust ARB compressors to pump up my tyres if need be)... Its a really robust comrpessor, that can be run with or without an air tank.. I had to have an air tank for the diff lockers.. I havn't tested it in the field yet, as i'm still installing all equipment...
This is the back of my 4by (toyota 80 Series Landcrusier) as it stands now... I will eventually enclose the tank and compressor, leaving breathing/cooling holes in the top peice of wood...
In this pic, you can see the ARB blue air hoses and Solinoids...
These following pics are before and after pics of the air adaptor install.. I wanted two of them (so a buddy can attach if need be at the same time) and for them to be easily accessable...
Back of the adaptor install... [/img]
This is the back of my 4by (toyota 80 Series Landcrusier) as it stands now... I will eventually enclose the tank and compressor, leaving breathing/cooling holes in the top peice of wood...
In this pic, you can see the ARB blue air hoses and Solinoids...
These following pics are before and after pics of the air adaptor install.. I wanted two of them (so a buddy can attach if need be at the same time) and for them to be easily accessable...
Back of the adaptor install... [/img]