Outer Limits 4x4 Board

Just found this site with some of the craziest mods i have ever seen-

Yes this is a Deawoo Matiz

hows the pinion's, when was the last time they saw oil




NICK

notice in the last 2 pics that the limiting strap is tied on at one end and dangling in the other.


NICK

the koreans are taking the booty fab baton and running with it as fast as they can

man thats some crazy ass shit

especially like the headroom shot........dont think i'd like to b in the buggy when it does need to use the cage

i`m lost for words

i think i need a hug

OMFG....
There is so much going on in those pics.... it hurts my brain...

Some of those look like they are taken in a professional workshop...check all the drive belts in the background....

I am really hoping that it is in there to be repaired.... but i highly doubt it

That site is awsome, The tech is first rate.

Is there a way to change or convert the sites language for the forum I would to read what these people are thinking just to get an idea where the craziness is coming from

The matiz " fark bill (the korean equivalent of bill Kim) this thing needs a chassis."

Well will just tack weld some channel to the bottom of the Monocoupe and then bolt up 500 kg of junk that rolls on the bottom of it and see how that goes.

If ya added some small charges underneath it the cabin could be an escape POD in a roll over situation.


Ruff that is some of the coolest Booty Fab

a link would be handy

V8Patrol wrote:a link would be handy

You could just type in the addy on the Photo's but I will go back and get it for ya.


http://www.4wd.co.kr/

Singo17 wrote: Well will just tack weld some channel to the bottom of the Monocoupe and then bolt up 500 kg of junk that rolls on the bottom of it and see how that goes.

Ruff that is some of the coolest Booty Fab

Have a good look i dont think there is any tack welds at all. I only see 3 tech screws holding this on

Love the recovery mount......And the weld penetration

I love the coil mounts
and the controll arms
and the roll cage
and the steering
and the 3 screws,
and the turn buckels, with all the angle as well
and the pinion angles
and the .................. ya well I think you get the idea.




Anyway I`m outa here, I got so much work to do on my lux now that I have some new ideas Thanks Ruff your always a big help

Singo17 wrote:You could just type in the addy on the Photo's but I will go back and get it for ya.

Type .... get with the modern world ..... click n go

ok so I'm lazy today

Is that T case only mounted from 1 side with a pivot, ever heard of adjustable transfer case angle on the fly, or am I seeing things

i like the PAJ with warn stickers all over it...








but no winch!

hmmmmm, disturbing

http://www.4wheelparts.co.kr/shop/lvDis ... ml?pcode=4

Check out all the Pedders Gear, wonder where it was made?

sweet se tony some off the things me and the old man make up arnt so wild

for some reason i think a lot of their mods are 're-active' rather than 'pro-active'.

bj56 wrote:sweet se tony some off the things me and the old man make up arnt so wild

Well i think some of the things that you guys have done are right up there with these pics

have already talked mum into moding her matiz.Told her it would be more economical with bigger tyres.Just didnt tell her how big.

Guts wrote:

Is that T case only mounted from 1 side with a pivot, ever heard of adjustable transfer case angle on the fly, or am I seeing things

Its hard to belive that they added that much beef to a matiz .. as for one sided mount .. you gotta be a bit sensible about weight

Doesn't look booty fab to me

they really love their car bodied 4wheelers



When booty fab goes bad

N*A*M wrote:the koreans are taking the booty fab baton and running with it as fast as they can

that is some horrible stuff, maybe i should go there, look for a job!! they would appreciate my skills!