Page 1 of 1
tb42 intercooler
Posted: Thu Apr 22, 2010 9:19 pm
by rob_rover
which intercooler for 200rwkw tb42 turbo bar and plate or tube and fin, which would suit it better?
Posted: Thu Apr 22, 2010 9:23 pm
by cooki_monsta
bar n plate is cheaper design iirc, but its what i run on mine, its only small but im only pushing 160
tb42 intercooler
Posted: Thu Apr 22, 2010 9:28 pm
by rob_rover
lookin at 600x300x76 with 2.5" inlet/outlet, or would one with 3" inlet/outlet be better for flow? and with design is better for cooling? cheers for the reply
Posted: Thu Apr 22, 2010 9:44 pm
by PGS 4WD
Go with the 3". Have made 380 rwkW through ebay bar and plate, air temps getting a bit higher but at 27 psi that's expected. At boosts up to 15 psi air temps only a couple of degrees over ambient.
Joel