Outer Limits 4x4 Board

Destroyed another rear mud guard on the tray on sat, wanting to change them over to rubber so they can handle a bit more punishment. What are you lads using as rubber mud guards/flares and where's the best/cheapest place to buy some in syd?

Cheers

Steve

i got sum from clarke rubber, but its dear as all hell. i saw sum in bunnings once, thats in vic, maybe diffrent story 4 you.

Do you know anyone who works in a quarry?

clark rubber are a retailing rip off go to an industrial supplier
http://www.indrub.com.au/rubber.html

Ebay has some in the gong usually, heaps on a roll, but id get some off ya.

I'd prob just get some plain truck mud flaps and cut them down. The problem you willg et if you use heavy duty belting is it will stay attached and bend whatever bracketry you are using. Been there and seen it on many tippers. Better to just rip off mud flaps and rebolt them on. maybe mount them they way trucks do so if they rip off you can rebolt them back on anyway.

Other option , make them removeable.

An old rubber excavator track would be bulletproof but heavy and thick

Rob

im in campbelltown i got a made who dose allot of conveyor repairs and alike i might be able to get you some but u would have to come pik it up
let me know how much u want and i`ll see what i can do
cheers

steve patrol wrote:Destroyed another rear mud guard on the tray on sat, wanting to change them over to rubber so they can handle a bit more punishment. What are you lads using as rubber mud guards/flares and where's the best/cheapest place to buy some in syd?

Cheers

Steve

http://www.purplepig.com.au/pig/web-con ... tions.html

enough said

Used to be a place Conveyors and something near cnr of Milperra road on Edgar St. Massive joint it was...
Try them.

bogged wrote:Used to be a place Conveyors and something near cnr of Milperra road on Edgar St. Massive joint it was...
Try them.

have moved to silvewater I think, key word was cheap so I didn't add http://www.habasit.com.au/

bog I'm sure you mis SYD like a hole in the head

Endless belt

They are based in Penrith Area..

Cheers

How muckin futch are you after, gimme a few dimensions and maybe you can "pickup" yourself from Wollongong, PM me, cheers.

how thick and how much? i can get you all kinds of conveyor belting. A lot of it has kevlar banding through it.... you won't destroy it in a hurry. If you can give me dimensions, i will cut it to size and you can organise through Outerlimits Freight Service to get it delivered.