Page 1 of 1

60 series auto problems HELP PLEASE!

Posted: Tue Apr 27, 2010 4:36 pm
by macneil
Hey Guys,

Mate has a 12ht 60 series Cruiser with an auto box behind it... on the weekend he went to drive off home got to the bottom of a hill stopped changed to 4 low went to take off all of a sudden no go in it.. car will select reverse perfectly in 4 low 4 high and 2 high but slips like buggery and wont really move in and foward drive gears...

he has had problems with it not shifting to over drive but never had this??

plenty of oil in it... but does smell bad but doesnt explain why it reverses???

Posted: Tue Apr 27, 2010 5:14 pm
by Black Bull
Reverse uses a different servo piston and bands. probably got just enough hydraulic pressure to engage it.

Drain the burnt fluid from the box and refill it with clean fluid and some Morey's Transmission fix, should get it driveable. and if treated nice may even last a while.

Posted: Tue Apr 27, 2010 8:31 pm
by Modified Toy
Forward and Reverse use differet clutchs, get it to an auto guy for a look, this transmission has no bands.
Sounds Major.

Posted: Wed Apr 28, 2010 7:07 pm
by macneil
Modified Toy wrote:Forward and Reverse use differet clutchs, get it to an auto guy for a look, this transmission has no bands.
Sounds Major.
well the transmission has blown for the drive gears.. going to look into an auto to manual conversion

Posted: Wed Apr 28, 2010 7:08 pm
by macneil
Modified Toy wrote:Forward and Reverse use differet clutchs, get it to an auto guy for a look, this transmission has no bands.
Sounds Major.
well the transmission has blown for the drive gears.. going to look into an auto to manual conversion