jump starting 24v
Posted: Tue Apr 27, 2010 9:41 pm
any one give me pointers on jumpstarting 24v?
does it have to be conected in a certain way?
does it have to be conected in a certain way?
Page 1 of 1
Posted: Tue Apr 27, 2010 9:46 pm
Nothing special. pos to pos, neg to neg like 12v. your supply batteries will have to be connected neg to pos like it is on the truck.
Posted: Tue Apr 27, 2010 10:37 pm
By which he means in series - in case you missed the "pos to pos, neg to neg" bit earlier.oldmate wrote:Nothing special. pos to pos, neg to neg like 12v. your supply batteries will have to be connected neg to pos like it is on the truck.
Posted: Wed Apr 28, 2010 7:44 am
as per the norm.
dont even need 24v to jump it, usually 1 single 12v bat will do it
dont even need 24v to jump it, usually 1 single 12v bat will do it
Posted: Fri Apr 30, 2010 7:31 pm
if its in a machine connect the 24v to starter motor and earth on engine somewhere as feeding a 12v battery 24v might be nasty but in a truck the batterys are normally next to eachother