Outer Limits 4x4 Board

hey peoples i have put a ls1 into my gq now i want to run exra alternators and ac compressor for air just wondering what people have done were/how they have mounted this stuff if u have pics and info would be appreciated

cheers

If you need more amps then you can get a higher amp output alternator or get your original alternator rebuilt to produce a higher amp output

i need to run a 24v alternator for my winch.....
and i want a second compressor for endless air..

24V alternator can be mounted above the standard alt on the passenger side, Driven By a V-belt pulley which can be clamped onto the front of the power steer pulley. Brackets will be custom. Contact MR sheetmetal in Nambour, QLD. He has done a few brackets, he may have templates?

There is a mounting kit available for a sanden type compressor (endless air type) that locates it high on the drivers side, and is driven off the original rib belt (or a longer version of)

bump.....
anyone?

marks 4wd do a kit for dual alts and dual ac compressors not cheap but they work well

look for et4wd on the 4x4 action forum he has 3 alternators on his ls

Marks have a secondary alt mount, relocation kit for original and A/C compressor mount which moves the compressor closer to the block

Oh, second alt runs of the serpentine aswell

i have looked at marks stuff i think its way over priced... 600 bucks for a bracket...? i would pay 300 but not 600

Mousie wrote:i have looked at marks stuff i think its way over priced... 600 bucks for a bracket...? i would pay 300 but not 600

It is overpriced, likely they are a GM part that could be sourced far cheaper

But I never chased them up, I'm not paying