Page 1 of 1
60 series gear boxs
Posted: Mon May 03, 2010 4:57 pm
by macneil
would a petrol 60 series gear box fit a 12ht motor???
Posted: Mon May 03, 2010 5:49 pm
by bad_religion_au
if you use the petrol clutch disk, then it should (might need a 2h bellhousing and pressure plate, if all 12ht's are auto)
Posted: Mon May 03, 2010 5:55 pm
by macneil
ive heard 2h manual boxes bolt straight up but can get a petrol one cheap.. so the petrol gear box will bolt up
Posted: Mon May 03, 2010 6:15 pm
by hulsty
Gearboxes are the same.
Posted: Tue May 04, 2010 8:59 am
by sonny
i have a 82 2h 60 series and got a spare 84 petrol as spares,the petrol 5 speed/transfer bolted straight onto the 2h bellhousing but i also needed the 5 speed tailshaft.
Posted: Tue May 04, 2010 9:42 pm
by flyology
The gearboxes are the same, but the clutches are different. Don't use a petrol clutch plate on a diesel. Use a diesel clutch.
Posted: Fri May 07, 2010 7:02 pm
by bad_religion_au
flyology wrote:The gearboxes are the same, but the clutches are different. Don't use a petrol clutch plate on a diesel. Use a diesel clutch.
the petrol and diesel one i compared had different spline count on the input shaft, so needed the petrol clutch disk in the diesel pressure plate to work. ymmv