Outer Limits 4x4 Board

Is it possible to interchange the dissys as the two wire dissy has a magnetic pulse generator. The three wire dissy appears to have a hall effect switch. I'm doing a belano distributor engine convertion to sierra, bought a vitara cam dissy and right angle drive housing and discovered the difference when I got home from Melbourne [300ks]
If it is possible to interchange the dissys which wire goes where.
Look forward to some answers.
Watty

It may be wise to ask in the Auto Electrics section, too.
As you know, mine is a 93 LWB efi.
Hope these pix of some use.
christover

Yoy might have to remove a section as the dizzy should measure arround 150 ohms , Cheers Paul.

they talking similar issues in this thread

http://www.auszookers.com/index.php?nam ... ght=wiring