Outer Limits 4x4 Board

Posted: **Thu Jun 17, 2004 11:56 am**

Are gen 2 and gen 3 Hilux transfers the same .

I have been told that the speedometer drive are different

I have a gen 2 hilux and i want to fit Rockhoppers to a gen 3 transfer then replace this with my transfer, do I need to change anything.

Posted: **Thu Jun 17, 2004 7:01 pm**

They are the same its just the wiering plugs are different on the 4wd light switch.

Posted: **Thu Jun 17, 2004 10:08 pm**

there are 5 different speedo drives and then the electronic one. basically to compensate for different diff and tyre combos. Just run what you have now.

As long as your case comes from an australian truck you will be right.

NICK

Posted: **Thu Jun 17, 2004 10:19 pm**

there are 5 different speedo drives and then the electronic one. basically to compensate for different diff and tyre combos. Just run what you have now.

Yeah Nick is this a simple way to recalibrate speedo when running bigger tyres, by changing the drive?

Sorry for hijack Old Yella.

Posted: **Thu Jun 17, 2004 11:53 pm**

Thanks guys, its out of a 91 model 2.8 deisel dual cab

I'll swap over speedo drives when I fit the new one and swap the plugs over aswell

Posted: **Fri Jun 18, 2004 5:10 pm**

it wont matter if u swap the drive wen u run your 35's the speedo wont b right anyway

Posted: **Fri Jun 18, 2004 6:13 pm**

This is what you should do :!:

Put it behind the standard T/case

Posted: **Sat Jun 19, 2004 9:07 am**

4sum4 wrote:This is what you should do

Put it behind the standard T/case

mmmmmmm low, low with crawler gears :twisted:

Posted: **Sat Jun 19, 2004 9:21 am**

hypolux wrote:it wont matter if u swap the drive wen u run your 35's the speedo wont b right anyway

I'll be getting some bigger wheels later anyway