Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

putting a coil chassis under my leaf gq ute...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 23
Joined: Sun Apr 25, 2010 5:36 pm
Location: brisbane

putting a coil chassis under my leaf gq ute...

Post by sprenger#4 »

any help or suggestions on putting a coil chassis under my leaf leaf gq ute..

is it worth it??

does anyone have a chassis??
cheers
Top
Posts: 103
Joined: Sat Dec 19, 2009 9:27 pm
Location: Ipswich

Post by tufftruckin »

Ludacris has a coil chassis spare. He is at goodna .
An ounce of precaution is better than a ton of cure!
Top
Posts: 612
Joined: Mon Nov 20, 2006 9:32 pm
Location: sunny coast

Post by shw337 »

i just put a 98 ute shell on my 89chassie. was bolt on only had to cut the front shock towers into the inner gaurd. also had to use the 89 steering shaft.
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
Top
Posts: 24
Joined: Fri Jul 10, 2009 5:34 pm
Location: bathurst

Post by stimpy »

leaf front gaurds are different to coil ones by about 60mm and it is well worth it
Top
Posts: 2
Joined: Wed Jun 10, 2009 2:45 pm
Location: Bundaberg

Post by Kirky90 »

hey mate...

me n a mate just did this conversion on his leafy... its pretty straight forward the only thing u gotta look out for r the front guards/quater panel n youll have to cut a hole in the inner guard for the front shock towers... the leaf ones r futher forward than the coil ones... coil steering colum is a bit shorter than the leaf so you will need a coil steering colum... ummm chassis is 305mm shorter or around that n the chassis rails are 100mm wider so u will need to mod the tray a bit... (and put tray mounts on if its a wagon chassis) and the plugs for the rear half of the wiring loom r different between coil n leaf so either re-wire or use a coil loom... everythin else is straight forward... all n all if ur happy with ur ute and all you r chasin is coils i reckon go for it...

goodluck... kirky
Top
Posts: 23
Joined: Sun Apr 25, 2010 5:36 pm
Location: brisbane

Post by sprenger#4 »

thanks guys for all the help!!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 123 guests