Page 1 of 1
divorce transfer Q
Posted: Sun May 16, 2010 9:56 pm
by troopymad
hi all
i have been given a MQ with a 2.8l 4 speed with a divorce transfer
i have cut it all down to just the firewall and floor pan to just behind the drivers seat and doing a SOA, power steering lockers and such and encloseing myself in tube
its going to be a 100% rock crawler buggy so i need reduction
what transfer would be good to mount in the same pos as this one as i cant get gears for this case or any other ideas
both F/R diffs r offset to the drivers side
cheers
Posted: Sun May 16, 2010 10:07 pm
by DamTriton
Rover LT230 I believe have a kit to make divorced
Posted: Sun May 16, 2010 10:12 pm
by troopymad
ill have a look into that one
anyone thing i could use one of the toyota transfers as a divorce ????
Posted: Sun May 16, 2010 10:14 pm
by DamTriton
troopymad wrote:ill have a look into that one
anyone thing i could use one of the toyota transfers as a divorce ????
Ask in the Toyo section.
Posted: Sun May 16, 2010 10:44 pm
by troopy94
Another option is to mount a nissan 720 transfer case in front of the mq case. The rear output of the 720 case will bolt straight up to the input of the mq case
Posted: Sun May 16, 2010 11:13 pm
by troopymad
is that u troopy (green zook)
if so thats what matt said
do know where one is?
Posted: Sun May 16, 2010 11:23 pm
by hillbilliywheelchair
troopymad wrote:ill have a look into that one
anyone thing i could use one of the toyota transfers as a divorce ????
yer theirs a remote kit for the hilux case so you could also run duels or tripples
Posted: Mon May 17, 2010 12:08 am
by DamTriton
hillbilliywheelchair wrote:troopymad wrote:ill have a look into that one
anyone thing i could use one of the toyota transfers as a divorce ????
yer theirs a remote kit for the hilux case so you could also run duels or tripples
Not "double offset" though. Hilux and Nissan GQ+ are centre rear diff
Posted: Mon May 17, 2010 8:45 am
by troopy94
Yeah its troopy here and I do know where another is but I've got to get the guy to part with it. The 720 case is identical to the nissan case internaly and the shifter from the 720 goes straight up so just reqires a new hole in the tunnel and it gives you the option of 3 ranges
Posted: Mon May 17, 2010 11:19 am
by troopymad
troopy94 wrote:Yeah its troopy here and I do know where another is but I've got to get the guy to part with it. The 720 case is identical to the nissan case internaly and the shifter from the 720 goes straight up so just reqires a new hole in the tunnel and it gives you the option of 3 ranges
ill have to try and find one. but if not ill have to look into other cases