Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

extractors off hj75 fit a hj60?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

extractors off hj75 fit a hj60?

Post by sonny »

hi i was wondering if extractors off a hj75 will fit onto a hj60 without any mods?thanks :)
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

According to this: http://www.pacemaker.com.au/toyota_6cyl.html

Same headers fit HJ 45/47/60/75. So I'd take that as a yes.
Posts: 28
Joined: Sun Nov 29, 2009 9:03 am
Location: kingaroy

Post by sonny »

thanks
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

as long as its the same motor, my 75s 2h extractors are of a 60 series
Go Hard Or GO Home
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Off/on topic... The turbo kit I had on my 75 was off a 60.
Don't take life too seriously...it isn't permanent.
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

off topic, the 3f 80 series extractors dont fit on the 3f 75 series
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

thats probably because the their could be alot of difference between the 80 and 75, where there isnt that much between the 60 and 75. if they have more room when making the extractors they would take it in my opinion, i would if i was custom making extractors, i would make my bends less sharp and easyer to get to the nuts on the flange.

but thats only a guess as to why
Go Hard Or GO Home
Post Reply

Who is online

Users browsing this forum: No registered users and 102 guests