Page 1 of 1
80 SRS CW&P
Posted: Tue May 18, 2010 3:55 pm
by noelb1
hi all , now I need some help from the toyota boys . 80 series lc 93 mod i need 4.56 crown and pinion now I know you can get them from locktup and 4h ..... but what other toyota diffs can I obtain these from to fit the 80 ie 88-97 hilux.
\
thanks in advance
Posted: Tue May 18, 2010 9:09 pm
by crankycruiser
only high pinion landcruiser cw&p will fit... lux's aren't high pinion.. so ya stuck with cruiser sorry mate
edit: i'm guessing u mean front diff???
Posted: Wed May 19, 2010 8:18 am
by noelb1
nah I don't meen the whole centre I meant the cw&p its self and bolt it into the 80 series centre. front and rear
cheers
Posted: Wed May 19, 2010 11:08 am
by RUFF
noelb1 wrote:nah I don't meen the whole centre I meant the cw&p its self and bolt it into the 80 series centre. front and rear
cheers
As far as i know nothing comes factory with 4.56 landcruiser rear and the hilux one wont fit the front.
Posted: Wed May 19, 2010 11:15 am
by chris_stoffa
Try chasing a Yukon CW & P out of the States, might find what you need there - Dollar is reasonable high at the moment
Cheers
Posted: Wed May 19, 2010 6:09 pm
by crankycruiser
hilux one wont fit the front or rear... so ya still stuck with cruiser cw&p's
all 80's were 4.1's so ya gotta go aftermarket
Posted: Wed May 19, 2010 6:58 pm
by dow50r
4.56 is available in the petrol Bundera front axle which is a high pinion as in the 80 front....so swaps in... but rear 4.56 80 series is after-market all the way. Ask Daz on here for a price.
Posted: Thu May 20, 2010 5:59 pm
by Mr DJ
dow50r wrote:4.56 is available in the petrol Bundera front axle which is a high pinion as in the 80 front....so swaps in... but rear 4.56 80 series is after-market all the way. Ask Daz on here for a price.
Thought they petty Bundy's were 4.3 as that's what mine was when I got it.