Page 1 of 1
Pajero Diff Ratios?
Posted: Sat Jun 19, 2004 9:05 pm
by lethal weapon
Does anyone know what the diff ratios for a 94 pajero diesel and petrol are?
Posted: Sat Jun 19, 2004 10:35 pm
by Bitsamissin
Ok :-
91-95 3.0 V6 = 4.625 or 4.875
94-99 2.8TDI = 4.90
94-99 3.5 V6 = 4.636
The 2.8 & 3.5 diffs are interchangeable the 3.0 V6 has a smaller rear diff.
Posted: Sun Jun 20, 2004 9:52 am
by -Scott-
Frank
Out of curiosity, how are the two 3.0 diff ratios "distributed"? My SWB has the 4.875, and I recall that most LWB models have the 4.625. Did the GL N/A Diesel have the same rear diff as the 3.0 SWB?
Cheers,
Scott (too lazy to walk out to his car to find his manual
)
Posted: Sun Jun 20, 2004 1:52 pm
by Bitsamissin
For the NH :-
3.0 V6 / 2.5 TDI swb & lwb GLS = 4.875
3.0 V6 GLX = 4.625
2.5 TDI GLX = 4.875
2.6 / 2.5 TD GL = 4.875
For the NJ :-
3.0 V6 GL / GLX / GLS lwb = 4.625
3.0 V6 swb GLS = 4.875
2.8 diesel GL = 4.875
All of these models had the 9" rear diff.
Posted: Tue Nov 02, 2004 4:54 pm
by MKarmyshev
Bitsamissin wrote:For the NH :-
For the NJ :-
3.0 V6 GL / GLX / GLS lwb = 4.625
3.0 V6 swb GLS = 4.875
2.8 diesel GL = 4.875
All of these models had the 9" rear diff.
Does anybody know diff ratio and size for '94 2.8TDI SWB A/T (V26, Japanese spec) ?
I found conflicting data-it is either 4.900 or 4.636.
It would be also great to know rear diff size and shaft diameter. Is it 30.5mm or 35mm?
Thanks for any help!
Posted: Tue Nov 02, 2004 6:13 pm
by Bitsamissin
Hi Mike, I checked my Japanese CAPS programme and no wonder you are confused.
There are 3 x swb 2.8 TDI's listed :-
- V26C (swb canvas top) = 4.90 diffs
- V26W (swb metal top) = 4.636 diffs
- V26WG (swb metal top, wide body) = 4.636 diffs
Both the 4.636 & 4.90 diffs are 9.5" rear and run the larger axles 33.5mm.
Posted: Tue Nov 02, 2004 6:25 pm
by MKarmyshev
Bitsamissin wrote:Hi Mike, I checked my Japanese CAPS programme and no wonder you are confused.
There are 3 x swb 2.8 TDI's listed :-
- V26C (swb canvas top) = 4.90 diffs
- V26W (swb metal top) = 4.636 diffs
- V26WG (swb metal top, wide body) = 4.636 diffs
Both the 4.636 & 4.90 diffs are 9.5" rear and run the larger axles 33.5mm.
Hello Bitsamissin,
Many thanks for taking a look!
Now its clear but I am getting metal top anyway-sometimes it's quite cold here.
That's great that it uses larger diff & axles, because I plan to run 35s for a while without any drivetrain mods until I can afford SAS.