Page 1 of 1
Rocky Diesel engine weight...
Posted: Fri Jun 04, 2010 10:46 am
by tehekho
Can anybody be of assistance here?
Trying to work out how heavy the lump is before I go pulling it out...
Posted: Fri Jun 04, 2010 8:32 pm
by dai-hard
They are heavy not sure exactly how heavy but my hoist stuggled.
Ended up taking the front wheels of to drop it down a bit so i wasnt lifting it so high.
Posted: Sat Jun 05, 2010 2:23 am
by Shambles
depends on your hoist, I took off the radiator support panel and lifted out the motor gearbox and transfer case out as a whole, and my hoist is as old as me
Posted: Sat Jun 05, 2010 7:09 am
by BundyRumandCoke
240kg, with most accessories. Or it may be 260kg. Its around that mark anyhow. Gearbox is around the 80kg mark, and transfer case about 25-30kg.
I have had a few in and out, and freighted a couple of motors and a gearbox.
Posted: Thu Jun 10, 2010 1:34 pm
by tehekho
OK!
I Think my crane is rated at 500KG on the longest setting, so shouldn't have a problem there!
Just a matter of getting off my butt and doing it!