Outer Limits 4x4 Board

Were can i get one

I made mine.
Pretty sure any good workshop manual has the drawings etc on how to make one. I know the geuine GQ manual has ...in the supplement for the 97 models at least.

Cheers Keith

ebay.

anzac wrote:ebay.

Yep, or any decent auto shop should either stock them, or have access to them. $30 from memory.

6" of 44.5 cds
2 x 5mm bolts ( i think without looking)
cut the heads of the bolts off, weld the threaded ends to the out side of the pipe with 20mm protruding at 180deg.

drill a big hole through the pipe at the other end to fit a screw driver through.

cheers smitty

Thank you all

Thank you all