Outer Limits 4x4 Board

hey guys i have a 2.8l non turbo 94 rocky and i was wondering how hard it is to turbo one , can i just use the manifold and intake from a turbo one etc. any body done it ?
cheers brenton

Mate

Its more complex than what you have indicated, lubrication and cooling plumbing also need to be addressed. Probably the reason for the purchase cost of a turbo installation kit.

I have an after market kit installed on my F77 who ever did the work went to considerable effort to install it.

Gravy

been there done that over boost destroy pistons . had oil return made to go into sump but there are heaps of littel things different. injector pump , vaulve ports oil return (turbo motor goes throught block for oil return )
Put in std turbo motor goes heps better.have some stuff going on ebay next few days ,turbo kit with inter cooler (no pipes) + injector pump needs rebuild as sitting for 18mths + safari snoorkel for rocky no mounting brakets
came of rocky from wrecker .

ferris, would you post a pic of the snorkle and list the stuff with price on the inventory list, or link to ebay auction

ta shambles

just put it on ebay will post link soon

here are the links for ebay:

http://cgi.ebay.com.au/DAIHATSU-ROCKY-S ... 4aa2f576fb" onclick="window.open(this.href);return false;

http://cgi.ebay.com.au/Daihatsu-rocky-2 ... 4aa2f56a48" onclick="window.open(this.href);return false;

thanks for the enquiry .

Check your PM inbox mate, sent you one today

hey guys i just ended up getting a DL50 and im going to put that in. figured it was better to get all the injector pump and other turbo spec parts in one go. i plan on just re routing the boost side of the turbo to run thru a small intercooler. any one had and experience with this?
cheers brenton