Transfer Case actuator conection 100 series
Posted: Sun Jul 04, 2010 9:38 pm
Hi all,
Got a problem with the conection from wiring loom plug to 4WD actuator socket on the full time transfer case .It just worn out and the only way to get a positive connection and get it to Actuate is to get under the car every time and give it a wiggle
What have others done to repair this..............
I've tried to cabel tie it in place -works for a while then comes loose also tried to silicone it in -same works for a while then no good
Are these male /female conections replaceable from Mr Toyota if so could some one provide the PART NO.. please
I been told that the actuators cost a fortune so thats not the solution
Got a problem with the conection from wiring loom plug to 4WD actuator socket on the full time transfer case .It just worn out and the only way to get a positive connection and get it to Actuate is to get under the car every time and give it a wiggle
What have others done to repair this..............
I've tried to cabel tie it in place -works for a while then comes loose also tried to silicone it in -same works for a while then no good
Are these male /female conections replaceable from Mr Toyota if so could some one provide the PART NO.. please
I been told that the actuators cost a fortune so thats not the solution