Just a curious question, Has anyone got any test results or dyno or however its done on how much Torque is being generated at the drum of a winch?
With all the mods these days it would be good to see some numbers to compare.
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch Torque..Any numbers on Nm generated at the drum?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Winch Torque..Any numbers on Nm generated at the drum?
Find out the amount of kg you can pull, multiply that by 9.8 (converting kg force to Newtons) and multiply that by the radius of the drum in metres.
ie 2487kg with a drum diameter of 90mm (radius 45mm or 0.045m)
2487 x 9.8 x 0.045 = 10967.67Nm
There is no actual absolute torque figure as such, the amount that is generated will be in proportion to the load applied, ie you can work out the instantaneous torque with a given load.
ie 2487kg with a drum diameter of 90mm (radius 45mm or 0.045m)
2487 x 9.8 x 0.045 = 10967.67Nm
There is no actual absolute torque figure as such, the amount that is generated will be in proportion to the load applied, ie you can work out the instantaneous torque with a given load.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Who is online
Users browsing this forum: No registered users and 1 guest