Way to hard to get parts
Posted: Tue Jul 13, 2010 5:24 pm
No wonder people dont buy these feroza's parts are hard to come by and no one wants to part with stuff...time to sell it for another GQ....swaps anyone lol
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Way to hard to get parts
Page 1 of 1
Re: Way to hard to get parts
Posted: Tue Jul 13, 2010 5:49 pm
Bursons have some hard to get parts. What are you after?
Re: Way to hard to get parts
Posted: Tue Jul 13, 2010 6:52 pm
i needed a water pump for my rocky the other day thought to my self that i would not see one for a week and get this when i walked into my rep co store they had one for within 2 hours. parts aren't hard to find its finding a shop that sells the parts and is willing to get them in for you 
Re: Way to hard to get parts
Posted: Tue Jul 13, 2010 8:01 pm
I've found (my experience is with charades) that you can generally get bits ex japan at fairly good prices if you can't find them domestically.
Re: Way to hard to get parts
Posted: Wed Jul 14, 2010 9:24 am
X2 and Repco carries water pumps, etc. too.chugga wrote:Bursons have some hard to get parts. What are you after?
Re: Way to hard to get parts
Posted: Wed Jul 14, 2010 4:13 pm
X2 Bursons. Good so far for me.
Re: Way to hard to get parts
Posted: Wed Jul 14, 2010 8:25 pm
Thanks for that guys will track down my nearest bursons if i keep it, needed idler arms n other bits mostly aftermarket parts...
Re: Way to hard to get parts
Posted: Thu Jul 15, 2010 1:01 am
If the balljoint on your idler arm is ok, then you can simply replace the bush. Around $16 from Bursons.the_fatman wrote:Thanks for that guys will track down my nearest bursons if i keep it, needed idler arms n other bits mostly aftermarket parts...