Outer Limits 4x4 Board

a mate of mine has a mid wheel base bunderra with a chev in it hook to an auto with the cruiser diff, so he wont have trouble pushing bigger rubber around.
the problem is that we cant fit the tyres under the damn thing so was wondering if you would know what work is involved and the best way in putting bigger tyers under it.. and it is leaf sprung

Converted from all coils to leafs?

Don't see that happening often!

Put 2 inch spring and shackle lift any maybe a 2 inch body aswell and you should fit 35 s

Mate if its leaf sprung it's not a bundy, if its a mid wheel base its a fj/bj73/74 if it looks like the same size as a bundy its fj/bj 70.

Missed the mid wheel base part...not a Bundera.

sprungupcruiser wrote:its a mid wheel base its a fj/bj73/74

+HZJ73 maybe?

why cant you fit the tyres on there? 2'' lift should do it fine, might need to move the front diff forward for front guard clearance. They will rub in the rear inner fender walls no matter what unless you have heaps of offset.

rustysrangierecks wrote:a mate of mine has a mid wheel base bunderra with a chev in it hook to an auto with the cruiser diff, so he wont have trouble pushing bigger rubber around.
the problem is that we cant fit the tyres under the damn thing so was wondering if you would know what work is involved and the best way in putting bigger tyers under it.. and it is leaf sprung

bundera has only one "R"

if it was a bundera (which its not) 2 inch lift would do, 80 series front coils lift would lift it 2 inches

HZJ73 - would be a cool rig 1hz or 1hdt powered bj73

my mistake about it being a bundera.

its only a play toy that we want to build on the real cheap (free if we can).. im sick of pulling it out with my rover so thats the whole reason we want to put them on

You could make up a 2" body lift cheap enough, which should be enough for most 35's (a 'big' 35 may rub....rub shnub)