Page 1 of 1

marks adapter loom vr v6

Posted: Thu Jul 15, 2010 8:24 pm
by pom
hey guys, just thought i would ask if anyone could help. Im in the middle of putting a v6 vr engine in a lux for a mate, he gave me everything needed to get it all going. The only problem is he just cut the loom in the guard so i dont know where the acc ign and start goes into the engine harness. Would anyone have a colour code wire diagram. Would really appreciate it, as i have around 20 wires coming from 2 plugs from the fuse box on the eng loom which i think is a stock hilux fuse box. thanx pom

Re: marks adapter loom vr v6

Posted: Wed Jul 21, 2010 11:58 am
by pom
i found the wiring diagrams finally ive got it turning over just no spark! if anyone knows which wire i can tap an ignition source into to make it get spark please let me know thanx pom

Re: marks adapter loom vr v6

Posted: Sun Jul 25, 2010 8:07 pm
by pom
a auto electrician fixed it all up for me the computer saying everything is fine and good but we have no spark of injector pulse!!!!!!!!!!!!! wtf? over it

Re: marks adapter loom vr v6

Posted: Fri Aug 06, 2010 12:36 pm
by ozy1
Does your computer have a constan power source,

when we put a vs v8 into my patrol, we missed one wire, and that was the constasnt power for the computer, without it, we had no injector pulse