Whats the easiest way to straighten things up with my setup right now.
here's 2 pics, you can see the bolt where the top hole goes to
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spare Tyre Carrier
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Spare Tyre Carrier
My spare tyre carrier seems to sag now and its extremely difficult to swing it open.
Whats the easiest way to straighten things up with my setup right now.
here's 2 pics, you can see the bolt where the top hole goes to
Whats the easiest way to straighten things up with my setup right now.
here's 2 pics, you can see the bolt where the top hole goes to
Resident Terrorist
Re: Spare Tyre Carrier
Bearing is probably flogged out/out of adjustment on your stub axle hinge.
Re: Spare Tyre Carrier
this is what's under the hinge tube
someone told me to jack the other end and that might straighten the pivot back
someone told me to jack the other end and that might straighten the pivot back
Re: Spare Tyre Carrier
why is it sagging?
Does the non hinged end get supported by that bolt whilst driving?
if so then i dont think it should be bending unless the whole rear bar is twisting or something while your flexing up maybe?
Does the non hinged end get supported by that bolt whilst driving?
if so then i dont think it should be bending unless the whole rear bar is twisting or something while your flexing up maybe?
03 HDJ100R GXL / 94 FJ45-80
Re: Spare Tyre Carrier
its actually held by two bolts the other one is on the top/behind the tyre.
not really sure why and how it got bent as I got the car with this issue.
There's half or a millimetre play on the hinge if you jiggle it. To be the hinge tube must've elongated a tiny bit making it sag.
Just worried if I try and bend it up with a jack it might elongate the tube more.
not really sure why and how it got bent as I got the car with this issue.
There's half or a millimetre play on the hinge if you jiggle it. To be the hinge tube must've elongated a tiny bit making it sag.
Just worried if I try and bend it up with a jack it might elongate the tube more.
Who is online
Users browsing this forum: No registered users and 1 guest