Outer Limits 4x4 Board

hey all I need some bolts:

grade doesnt matter, lenght 40-50mm, thread:

14x1.25
10x1

???? any help
cheers,
Serg

bolt pro, casua dr. varsity lakes?

There must be a gazillion fastener joints in the area: http://www.google.com.au/search?q=fasteners+gold+coast" onclick="window.open(this.href);return false;

Or this guy will post them to you: http://www.bolts.com.au/" onclick="window.open(this.href);return false;

dude check the yellow pages....................


but dont go to bunnings in any case, they are way expensive.


Try these guys....heaps cheaper than bunnings
-Boltpro
-Coventry fartsniffers

bunnings yeah right! and conventry fastners can kiss my arse....im a chippy by trade so not a complete noob.....did you guys notice the thread I want. My local bolt supplier/fastenr specialist doesnt carry those threads.....could order a box of 100...I only need 1 of each.

14x1.25 is fine and spark plug size

10x1 is extra fine

Nut and Bolt Factory Yatala

or douglas fasteners , also in yatala

uninformed wrote:14x1.25 is fine and spark plug size

10x1 is extra fine

14-1.25 is a crank bolt on some Hondas apparently. Dunno if that helps but maybe a wrecker can find one if all else fails. (That info is just from google btw, it might be wrong).

I once needed the same thread to blank off some holes for pollution gear, they must have been machined at the same time as the spark plug holes. I ended up "modifying" some spark plugs to do the job.

The one in Nerang is very good, the yellow one on Spencer Rd, but I cant for the life of me remember what its called.

ACT Nuts and Bolts,

Talk to Tina, Bruce or Graham, They all know their $hit.
Upton rd Bundall.

Cheers, Dano.

tired most of the usual suspects.

ACT didnt have either.

the one at nerang had the 10x1mm, I was told by coastal at labrador that the 14x1.25 isnt available just use a sparkplug....a lathe would be handy

mate this is the best i can find

http://cgi.ebay.com/ebaymotors/wheel-lu ... 0415236389" onclick="window.open(this.href);return false;

you could also try bmw or mini wheel studs