Outer Limits 4x4 Board

Got the go ahead by my engineer or Car compliance bloke to cut my car.
As per the phone call, I said what i'm doing to the car (GQ cut)
His reply was go ahead with the conversion and he will inspect the welds and all the work before it gets cleaned up. If all is good, go ahead cleaning up the conversion and when its all done he will comply and then take it to the DOT QLD...
Now I've been told there is form that need to filed out before hand and need approval.
Is this correct ? Because at this stage it half cut..
And if so my car compliance bloke has some explaining to do.

http://www.transport.qld.gov.au/Home/In ... fications/" onclick="window.open(this.href);return false;


Dont trust us, Get it straight from the horses mouth

Yeah its easy, don't even need an engineer.
Get a blue plate for panel van to ute conversion

bru21 wrote:Yeah its easy, don't even need an engineer.
Get a blue plate for panel van to ute conversion

is this all that is needed?

scuba steve 22 wrote:

bru21 wrote:Yeah its easy, don't even need an engineer.
Get a blue plate for panel van to ute conversion

is this all that is needed?

In QLD yes. But it varies from complier to complier as to what they expect done. Some will want to inspect progress others are happy to just sign off on the finished job. So check with who you are getting it done by first.

too easy then
does any body know of someone who can blue plate it for me, up this way?
rainbow beach/gympie that is

cheers steve

Maybe the guy in Rainbow that does all the Jeep gear?

RUFF wrote:Maybe the guy in Rainbow that does all the Jeep gear?

that would be rob rye, already spoke with him about an engine swap.
his son does the engine swap blue plates, but not sure about the cab cuts
ill ask tomorrow. thanks for all the help

cheers steve