Page 1 of 1
diff gears 60/ 80
Posted: Sun Aug 01, 2010 8:59 pm
by simkell
Out of curiosity are the internal gears from the center of a 80 series front and a 60 series front interchangeable in an ARB diff lock?
I know it is possible to swap the gears between the nissan center and the 80 center, but don't know about the two landcruiser variants.
Any info would be awesome.
Re: diff gears 60/ 80
Posted: Mon Aug 02, 2010 8:33 pm
by simkell
anyone?
Re: diff gears 60/ 80
Posted: Mon Aug 02, 2010 8:51 pm
by sprungupcruiser
Mate I think the rears are the both the 9.5 inch diff, but the 80 series front would be a high pinion reverse cut 8 inch diff, where as the 60 series would be the same as the rear. Do a bit of a search and I'd imagine you'd be able to confirm this.
Re: diff gears 60/ 80
Posted: Mon Aug 02, 2010 9:16 pm
by simkell
Yeah mate it is a 9,1/2 front, that why I want to try and fit an 80 axle inside a 60 series diff. I have access to mills lathes and other nice machines to mod the diff, but was not sure if the spider gears were interchangeable between the two ARB centers.