Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hz egr removal for turbo install

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 227
Joined: Thu Dec 18, 2008 7:51 am
Location: Qld

1hz egr removal for turbo install

Post by crunk81us »

Turbo and parts are on the way for the install onto my 105's 1hz. I have done some searches but can't find the answers I am after.
I a fairly confident I will be right to d/c the egr stuff, but how is this going to affect my electrics?
It is mechanical injection but there are computers monitoring stuff.
I currently have a tps fault, which i believe wont affect the way it runs?
How do i disconnect the egr stuff without having lights flash on my dash?
can I disconnect the computer? where would i find it?
has anyone done this?
please help
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Re: 1hz egr removal for turbo install

Post by Z()LTAN »

I did this with my engine.

I don't know how it will affect your electrics as i put the 105 engine into a 75.

I blanked the egr port on the manifold and took the diaphragm section out of the crossover pipe.

There are a few pics in my build thread mate.
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 227
Joined: Thu Dec 18, 2008 7:51 am
Location: Qld

Re: 1hz egr removal for turbo install

Post by crunk81us »

I think I'm right with the mechanical bits.. just the stupid computer i need help with.
I'm going to leave all the bits there so it looks like it's working.. :finger: @cops
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests