Outer Limits 4x4 Board

im lookin into doin a cab lift on a 08 model bt50
i have looked into the cab mount bolts n found that the 2 rear bolts on each side of the cab appear to look like studs
i cant find the head of the bolts inside the cab
if anyone knows anything bout this or can help out somehow it would b appreciated
thanx

i had a quick look at mine today, the mounts look the same as the rest of them. my vehicle is stripped atm and im having to rewire it thanx to my puppy getting in and eatting the wiring/body harness (thats another story). im doing my 2inch body lift in a week or so before i put the new carpet in. There all M10 bolts and your body mounts are 2"dia you have 8 on the body and 6 on the tray

how did the lift go??
can it be done??

of course it can be done, the lift blocks are in the garage just 2"x2" compressed polyuathane mounts, will have to wait for the bills to be paid first, land and water rates, gas and power comes before bigger rubber,
http://www.4wdmonthly.com.au/forum/foru ... .php?f=119" onclick="window.open(this.href);return false;
try here mate alot of ranger/bt50 info on this forum